![]() Every track you would like to record on needs to be armed first.Ģ.Perform as you would if you were recording. It also turns the track's playback meter into a record meter. Arming a track tells SONAR LE where you want to record material. It will turn red to let you know that the track is now record enabled. That way, you get the strongest possible signal without distortion, as any digital distortion that occurs in this process is not repairable.ġ.Click the Arm button in your new audio track. The idea is to try to get the input level to rise as high as possible, but without ever reaching the maximum. If it is too high, it will overload the input channel and be distorted. If your input is too low, it will be lost in the background noise. ![]() Most often left channels are represented by odd numbers and the right ones are represented by even numbers.īefore trying to record, you may want to check and adjust the audio input levels. Some audio interfaces refer to their stereo inputs as pairs, like 1/2, 3/4 or 5/6. If you would like to record a stereo track select "stereo". You will usually choose 1 & 2, because these are most commonly the outputs that speakers or audio monitors are connected to.Ĥ.In the track's Input field, choose the audio input that your instrument or microphone is connected to. There are a few ways to do this:Ī.Grab the bottom of the track and expand it vertically by dragging downward.ī.Hold down the Ctrl key and tap the Down Arrow until the properties are displayed.Ĭ.Hit the F key to fit all of the tracks to the screen size.ģ.In the track's Output field, click the dropdown arrow and select an audio output from the menu. As an alternative you can also create a new track quickly by doing the following: in the Tracks pane, right-click wherever you want to insert a track, and choose Insert Audio Track from the popup menu.Ģ.You will need to expand the new audio track in order to view its properties. Let's set up a track for recording digital audio:ġ.Insert a new track by going to Insert | Audio Track. Let's open a new project for this tutorial.Ģ.Select the " Blank (no tracks or buses)" template and click OK. (Click the Help menu in SONAR LE, or push the F1 key while in the program to access the Help files.) If you have never connected an instrument or microphone to your sound card, you may want to read the section entitled "To Connect an Electric Guitar to Your Computer" in the SONAR LE Help Files. A preamp raises it closer to the proper recording level. The reason you need a preamp is because microphones usually provide a very low signal. In this case you can plug your microphone directly into the input. To record digital audio, you need to connect your instrument or microphone preamp to one of the inputs on your sound card. The information in this article applies to: ![]() Audio Tutorial-setup/Record/Playback Last updated on ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |